Which is better for coils in high-frequency transformers: flat copper tape or litz wire?
In conclusion,use the Litz wire or flat copper tape based on the magnetic core size and the current.
Transformers used in medical applications must meet the following requirements:
1.The safety and compliance standards are different. The medical isolation transformer safety and compliance standards higher national industry standards (iec61558-1-2) and international standards (UL 60601-1:1988)
2.Lower leakage current
3.The creepage distance and air gap are smaller
4.Lower temperature rise
5.Hi Pot standard (generally above 4000V)
6.Insulation grade (generally grade B above 130 ℃)
7.Bottom lead wire design
8.Electrostatic shielding is required between primary and Second
9.Built in recoverable thermal protector device etc.
10 key Advantages of Toroidal Transformers
1. High electrical efficiency：
2. Less magnetic interference：
3. Low temperature rise:
4. Low-temperature properties:
5. Lower Noise Level：
6. Low Off Load Loss：
7. Flexible design:
8. Small Size and lght weight：
9. Easy Installation：
10. More economical:
It can work, in fact, the transformer is usable in circuits ranging from 45Hz to 60Hz. The transformer 50/60Hz is widely accepted to be universal in use. The materials are the same, but there is a variation in the number of turns. Transformer coils operating at a power supply frequency of 50Hz require a little more per volt than those that operate at a power supply frequency of 60Hz. Thus, we find that the cores of both transformers are exactly the same…
Vacuum potting fix the lamination steel and bobbin, and at the same time, ensure that the transformer will not corrode when placed in the air for a long time. It is perfect for applications in harsh environments, where dust, lint, moisture and corrosive contaminants can accumulate.
Since traditional transformers can’t meet today’s efficiency requirements, high-frequency transformers were invented. High-frequency transformers improve efficiency, as well as save power, and have a longer service life than standard transformers.
The basic principles of step-up transformer and step-down transformer are the same.The main difference between a step-up transformer and a step-down transformer is their performance during their operation. The step-up transformer is designed to increase the output value, while the step-down transformer is designed to decrease it. Here, we discuss the differences between step-up transformers and step-down transformers, including definition, voltage，windings, conductor sizes, magnetic fields, and applications.
Learn Unicreed which types transformers could be used in PCB board, such as the following:
1. 50/60Hz Encapsulated Transformer (0.35VA-24V)
2. Toroidal Transformer (15VA-3000VA)
3. Open frame/Linear Transformer (1.1VA-600VA)
4. High Frequency Transformer
5. Common Mode Choke(1.5W-35W)
6. Coils
Lamination material for transformers is silicon steel, silicon steel is a kind of steel containing silicon (silicon is also called silicon), and its silicon content is between 0.8% and 4.8%. Silicon steel has the characteristics of high magnetic flux, low iron loss, low temperature rise, low no-load current, low noise, etc. The silicon steel can generate a large magnetic induction intensity in the energized coil.
A transformer works in the flyback circuit, the output and input of the secondary transformer are reversed. The transformer’s magnetic core stores energy during operation, so the magnetic density is higher than other methods， the flyback transformer has a much lower power rating.
China First Transformer Manufacturer Delivers Custom Designs in 48 Hours
Free Customized & Free Samples For You！
We will contact you within 1 working day, please pay attention to the email with the suffix “sales@unicreed-transformer.com”.
