en English

Why Do SMPS Transformers Need To Leave Gaps In The Magnetic Core?

This article discusses the need for magnetic core gaps in switching power supply (SMPS) transformers, how they prevent saturation, and how they affect power loss. Continue reading to find out the importance of gaps in SMPS converters.

What is the purpose of gaps in SMPS transformers?

Transformers used in switched-mode power supplies (SMPS) have gaps to keep the converter from overheating.

When a transformer core reaches saturation, its magnetic flux intensity has risen to an unsustainable level. The transformer loses its capacity to transfer energy effectively when the core saturates because it can no longer hold energy.

High-frequency switching currents that can quickly increase the magnetic flux density are applied to the inductor in an SMPS. In the absence of gaps in the transformer core, saturation could result from an excessively high magnetic flux intensity. The effective magnetic path length is extended in the transformer core by adding a tiny air gap, which lowers the magnetic flux density and avoids saturation.

During the design phase, the gap size is carefully chosen to strike a balance between the conflicting demands of transformer size, efficiency, and cost. Better saturation protection will be provided by a bigger gap, but the transformer’s size and price may also increase. A smaller difference will result in a smaller, more affordable transformer, but it might not offer as much saturation protection. The ideal gap measurement is determined by the SMPS’s particular design specifications.

Why do SMPS transformers need to leave gaps in the magnetic core?

To avoid saturation, the magnetic cores of SMPS converters must have gaps. An SMPS transformer’s center becomes magnetized when an electric current passes through its windings and creates a magnetic field. The output waveform may be distorted if the core becomes overloaded, which could have an impact on the transformer’s effectiveness and performance.

The magnetic flux intensity of the transformer is decreased by leaving gaps in the magnetic core, which lessens the possibility of saturation. The transformer’s particular design specifications and the application for which it will be used will determine how big the gap should be.

While leaving gaps in the magnetic core can help prevent saturation, the decreased magnetic coupling between the windings can also cause more power loss. To guarantee maximum efficiency and performance, it is crucial to carefully consider the gap size when designing an SMPS transformer.

How do gaps in the magnetic core of SMPS transformers prevent saturation?

Switch-mode power supply (SMPS) transformers are made to move electrical energy via electromagnetic induction from one circuit to another. The transformer’s core, which offers a magnetic route for the transfer of energy, is essential to this process.

When the magnetic flux density in a transformer reaches its maximum, the core becomes saturated, and subsequent rises in the magnetic field strength will not result in a corresponding increase in the induced voltage. Saturation can cause a variety of issues, including decreased efficiency, increased heating, and even transformer harm.

Leaving gaps in the magnetic core of an SMPS transformer can help avoid saturation. The magnetic flux density in the center is decreased as a result of these gaps increasing the magnetic path’s resistance.

The magnetic field strength necessary to generate a specific amount of magnetic flux density is also increased by increasing the reluctance. As a result, the transformer can work with a stronger magnetic field without the core becoming saturated. The gaps may also aid in lowering the quantity of magnetic flux leakage, enhancing the transformer’s effectiveness.

The gaps’ dimensions and locations are meticulously chosen to strike a balance between preventing saturation and reducing energy losses brought on by greater reluctance. Typically, the gaps are produced by inserting spacers made of materials like paper or plastic in between the magnetic core’s laminations.

What happens if an SMPS transformer doesn’t have gaps in the magnetic core?

Without gaps in the magnetic core, an SMPS transformer’s magnetic flux will be focused in the core, producing a very strong magnetic field. As a result, the core may become saturated and be unable to further raise the flux density. The inability of a magnetic core to transmit energy effectively when it reaches saturation can lead to a number of issues, including transformer overheating, poor regulation, and decreased efficiency.

To avoid core saturation and guarantee effective energy transfer, SMPS transformers must have gaps in the magnetic core. The gaps aid in regulating the magnetic field’s intensity and preventing it from rising excessively. Designing an effective SMPS transformer depends heavily on the size and placement of the gaps, which are usually established through meticulous calculation and simulation.

Is there an optimal size for gaps in SMPS transformers, or does it vary depending on the application?

Typically, the magnetic flux intensity, core losses, and magnetizing current trade-offs are taken into account when determining the gap size in SMPS transformers. The efficiency will decrease as a consequence of the larger gap, which will also increase the core losses and magnetizing current. Contrarily, a smaller separation will boost the flux density, lowering core losses and magnetizing current, but it may also result in core saturation and decreased efficiency.

In SMPS transformers, the gap size is usually selected to balance the required levels of core losses and magnetizing current with the desired levels of efficiency, regulation, and power density. In order to achieve this, a compromise must be made between the competing demands of high magnetic flux density for effective energy transmission and low flux density to prevent core saturation.

Therefore, based on the particular design and application requirements of the transformer, the ideal gap size in SMPS transformers can vary significantly. Based on the particular parameters and operating circumstances of the transformer, it is usually calculated and simulated carefully to determine.

Are there any disadvantages to having gaps in the magnetic core of SMPS transformers?

Yes, there can be disadvantages to having gaps in the magnetic core of Switched-Mode Power Supply (SMPS) transformers.

The primary disadvantage of having gaps in the magnetic core is that it can reduce the efficiency of the transformer. This is due to the magnetic flow in the core having to “jump” across the air gap since it is no longer continuous. This increases the magnetic path’s reluctance (resistance), which lowers the quantity of energy that can pass through the transformer as a result. As a result, the transformer might operate less effectively and produce more heat, which might eventually shorten its lifetime.

Gaps in the magnetic core can also make the transformer bigger and heavier because a bigger core may be required to make up for the lost effectiveness. Because it can be more challenging to create a precise and reliable gap in the core, the presence of gaps can also raise the cost of making the transformer.

Despite these possible drawbacks, spaces in the magnetic core are frequently used in SMPS transformers because they can enhance some of the transformer’s properties. For instance, a gap in the core can aid in preventing the transformer from saturating at high currents, which can result in distortion in the pattern of the output voltage. The gap can also aid in enhancing the transformer’s transient reaction, enabling it to better manage abrupt changes in load or input voltage.

Are there any other methods to prevent saturation in SMPS transformers besides using gaps in the magnetic core?

Yes, there are alternatives to using magnetic core gaps to avoid saturation in SMPS transformers.

Utilizing a magnetic core substance with high permeability and low saturation risk is one approach. Due to their high permeability and minimal losses, ferrite and powdered iron are frequently used as the core materials in SMPS transformers. The desired amount of magnetic flux can be attained without saturating the core by using a core material with a greater saturation flux density.

Another approach to distributing the magnetic flux more evenly throughout the core is to use numerous winding arrangements. For instance, a transformer with a primary winding that is center-tapped can divide the current flow and weaken the magnetic field in each side of the core, lowering the danger of saturation. Similar to this, a transformer with a secondary winding made up of multiple sections can spread the flux more evenly and lower the likelihood of saturation.

The transformer can also be made with a greater turns ratio, which lowers the current flowing through the windings and consequently lowers the intensity of the magnetic field in the core. This approach is frequently used in high-voltage situations where arcing and breakdown risk reduction is the main objective.

What is the impact of gaps in the magnetic core on the efficiency and performance of SMPS transformers?

Depending on the size, location, and unique design requirements of the transformer, the effect of gaps in the magnetic core on the effectiveness and performance of SMPS transformers can differ.

Generally speaking, a gap in the magnetic center can lower the transformer’s efficiency. This is so because the gap increases the magnetic path’s reluctance (resistance), which lowers the quantity of energy that can pass through the transformer. As a result, the transformer might operate less effectively and produce more heat, which might eventually shorten its lifetime.

However, gaps in the magnetic core are frequently used in SMPS transformers because they can help to improve some performance characteristics, despite the potential decrease in efficiency. For instance, a gap in the core can aid in preventing the transformer from saturating at high currents, which can result in distortion in the pattern of the output voltage. The gap can also aid in enhancing the transformer’s transient reaction, enabling it to better manage abrupt changes in load or input voltage.

Gaps’ effects on a transformer’s performance will vary depending on the application’s particular design specifications. A gap in the core may be advantageous for a transformer that needs a quick reaction time or low leakage inductance, but it may not be for a transformer that needs high efficiency. As a result, it is possible to optimize the gap’s size and location in order to accomplish the desired performance characteristics for the particular application.

Share on facebook
Facebook
Share on twitter
Twitter
Share on linkedin
LinkedIn

Leave a Reply

Your email address will not be published. Required fields are marked *

fourteen + fourteen =

Ask For A Quick Quote

We will contact you within 1 working day, please pay attention to the email with the suffix “sales@unicreed-transformer.com”